P1722: Estimated vehicle speed signal fault in a Nissan automatic or CVT; a different stall speed fault on Jaguar

Nissan P1722 estimated vehicle speed signal

Severity: Severity not verified — if the car runs badly, have it inspected

Owners report limp mode and CVT replacement with this code, but we found no source that sets a safe driving limit.

It gets more serious if:

  • Inspect soon: The vehicle drops into limp mode, will not move well, or shifts harshly.

Source: how we rate severity

P1722 in short

On Nissan, P1722 means the estimated vehicle speed signal used by the transmission computer is wrong; on Jaguar it is listed as a stall speed failure. Nissan owners with it report limp mode and CVT trouble. We could not verify how far it is safe to drive, so get it scanned soon.

The Nissan transmission computer works out an estimated vehicle speed from its own inputs and checks it against other signals. When they disagree, it stores P1722, and a Nissan bulletin for the 2003 Murano pairs it with P0725, the engine speed signal.

On 2012 Sentra and Quest CVTs, technicians read P1722 beside P0744 and P1778 step motor codes and called the CVT internally damaged; one Sentra dropped into limp mode from 70 to 10 mph.

Jaguar uses the number for a stall speed failure, a different fault. We found only one Jaguar report, so treat that meaning as thinly supported.

Pick your make

P1722 is a manufacturer-specific code: its meaning depends on who built the car.

Other makes: meaning not verified. Check with a scan tool that reads manufacturer definitions.

Most likely causes

  1. Cause 1: Internal CVT problem (step motor, valve body or clutch)

    Supported by vehicle data
    Why it ranks here
    Sentra and Quest technicians read P1722 with P1778 step motor and clutch solenoid codes and recommended CVT replacement.
    What would change this
    Rises if P1778 or P0744 are stored and the vehicle goes into limp mode. Falls if P1722 is the only code and the vehicle drives normally.
  2. Cause 2: Speed or engine speed signal problem

    Supported by vehicle data
    Why it ranks here
    A 2003 Murano bulletin pairs P1722 with P0725 engine speed signal, so the signal path is worth checking first.
    What would change this
    Rises if P0725 or speed sensor codes are also stored. Falls if the signals read normally.
  3. Cause 3: Transmission stall speed failure (Jaguar)

    Possible — needs testing
    Why it ranks here
    One XK8 readout lists this meaning with a gear 4 range code; it is a single report.
    What would change this
    Rises only on a Jaguar with torque converter or clutch symptoms.

What to test first

Start at step 1. Each result tells you what it means and where to go next.

  1. Step 1: Read all codes and note whether P0725, P0744, P1778 or other speed codes are stored with P1722.

    Low riskTool: OBD-II scan tool

    • IfP0725 or speed sensor codes are stored

      It meansStart with the speed and engine speed signals.

      Go to step 2

    • IfP1778 or P0744 are stored and the vehicle hesitates or enters limp mode

      It meansThe CVT may have internal damage; go to the shop check.

      Go to step 2

  2. Step 2: Have a shop compare the transmission speed, engine speed and vehicle speed readings on a scan tool and inspect the sensors and wiring.

    Best left to a shopTool: scan tool with live data

    Warning:Do not road-test hard on a transmission that slips or enters limp mode.

Symptoms

  • Check engine light on
  • Delayed or harsh engagement Gets more serious: stop and have it checked.
  • Limp mode or sudden speed loss Gets more serious: stop and have it checked.

How to fix

  1. Step 1: Do not clear the code before a shop has read it; the stored data helps separate a sensor fault from CVT damage.

On your vehicle

Nissan

  • 2003 · Murano

    Supported by vehicle data

    A 2003 Murano bulletin covers P1722 with P0725; an owner was told the CVT valve body was the cause.

  • 2012 · Sentra

    Supported by vehicle data

    2012 Sentra owners report P1722 with P0744 and P1778, limp mode and internal CVT problems.

  • 2012 · Quest

    Supported by vehicle data

    A 2012 Quest readout lists P1722 with step motor and solenoid codes and a recommended CVT replacement.

  • 04061Status unverified

    P0725 engine speed signal and P1722 estimated vehicle speed signal

    2003murano · NHTSA 10007553

    Covers the two speed signal codes on the 2003 Murano; the summary does not give the repair.

    We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.

Jaguar

All Transmission codes

Sources and review

  1. NHTSA complaint 1466797: 2012 Nissan Sentra, P0744, P1722, P1788 — NHTSA (owner complaint)
  2. NHTSA complaint 942657: 2003 Nissan Murano, P1722 — NHTSA (owner complaint)
  3. NHTSA complaint 1466478: 2012 Nissan Sentra, P1722, P0744, P1778 — NHTSA (owner complaint)
  4. NHTSA complaint 1255931: 2012 Nissan Quest, several transmission codes including P1722 — NHTSA (owner complaint)
  5. Nissan bulletin 04061: P0725 engine speed signal and P1722 estimated vehicle speed signal — Nissan North America (via NHTSA flat-file summary)
  6. P1722 manufacturer-specific definitions — TroubleCodes.net (BAT Auto)
  7. NHTSA complaint 686055: 1998 Jaguar XK8, P1722 and P0734 — NHTSA (owner complaint)
Last reviewed
Written by
Saurabh K.
Editorial review
Pending
Technician review
Technician review pending

This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error

My Car

Pick your car and code pages will point out notes and bulletins for it. Saved only in this browser.

Fill this in from your VIN

Used once to identify your engine; not stored.