P062A: Problem in the fuel pump control circuit, range or performance
Fuel pump A control circuit range/performance
Severity: Inspect soon
A fuel pump control fault can starve the engine. Owners with P062A report stalls at highway speed and limp mode, so do not wait long before having it checked.
It gets more serious if:
- Stop: The engine stalls, drops into limp mode or will not restart. Giulia owners report stalling on the highway and a rapid loss of power with P062A stored, and a Ram owner reports stalling. Do not keep driving; have it towed or checked where it sits.
P062A in short
P062A means the computer saw the fuel pump A control circuit outside its expected range or performance. Owners with it report stalling and limp mode, and dealers replaced the fuel pump on a Giulia. Have it scanned soon and avoid driving if the engine stalls.
Many modern fuel systems have the computer control the fuel pump through a driver or module rather than switching power directly. P062A is set when the computer sees the pump A control circuit outside the expected range or performance.
The complaints read describe a pattern: a 2016 Ram 1500 owner's scan reads 'circuit A fuel pump range/performance'; two Alfa Romeo Giulia owners report P062A with P008A (fuel pump related) and a fuel pump replacement on the 2018 car, with limp mode or a highway stall.
A repair is not guaranteed by fuel pump replacement. A 2019 Ram owner reports the code returned after the fuel pump was replaced, and the 2016 Ram owner's dealer fixed a connector behind the driver wheel and the code still returned. The wiring and the pump control path need testing before parts.
Most likely causes
Cause 1: Fuel pump or its driver output
Supported by vehicle data- Why it ranks here
- A 2018 Giulia's technicians reported P062A and P008A as a fuel pump issue and replaced the fuel pump. A 2017 Giulia owner reports the same pair 'point to a fuel pump error'. On a 2019 Ram the code came back after a pump replacement, so this is not a sure fix.
- What would change this
- Rises if fuel pressure is low or the pump does not respond when commanded. Falls if pressure and pump response are normal.
Cause 2: Wiring or connector in the pump control circuit
Possible — needs testing- Why it ranks here
- On the 2016 Ram the dealer replaced a connector behind the driver wheel; the code and the check engine light returned, so the circuit is worth testing but is not proven as the cause.
- What would change this
- Rises if voltage drop or continuity testing finds a poor connection. Falls if the circuit tests good under load.
What to test first
Start at step 1. Each result tells you what it means and where to go next.
Step 1: Read all stored codes and freeze-frame data and note whether P008A, P0087 or U0415 are stored with P062A.
IfP008A or P0087 are stored with P062A
It meansThe fuel pump and fuel pressure are the likely area.
IfP062A is stored alone and comes and goes
It meansTest the wiring and connectors.
Step 2: Have a shop measure fuel pressure and check the pump's commanded and actual output.
Warning:Fuel is under pressure and flammable. A leak near hot parts can start a fire; let a shop relieve pressure and connect gauges.
IfPressure is low or the pump does not follow commands
It meansThe pump or its control is failing.
IfPressure is normal under load
It meansTest the wiring and connectors before replacing parts.
Symptoms
- Check engine light with reduced power or limp mode
- Hesitation or loss of power under load
- Engine stalls at highway speed and may not restart Gets more serious: stop and have it checked.
How to fix
Step 1: Have a shop read all codes, including any fuel pump or pressure codes stored with P062A, before replacing the pump.
Parts and cost context
- Fuel pump:A pump replacement fixed one Giulia but not a Ram where the code returned. Confirm fuel pressure and wiring first; labour varies, get a quote.
Labor varies by vehicle and shop; get a quote before you approve a repair.
Compare used part prices on PartPriceGuideOn your vehicle
RamYour car
2016–2019 · 1500
Supported by vehicle dataA 2016 owner's scan reads P062A as 'circuit A fuel pump range/performance'; a connector repair did not clear it. A 2019 owner reports stalling and the code returning after a fuel pump replacement. Complaints only, not verified by NHTSA.
Related codes
P062A questions
Is it safe to drive with P062A?
It can stall the engine at speed, as Giulia and Ram owners report. Get it checked soon and do not keep driving if the engine stalls.
Should I just replace the fuel pump?
Not first. The code came back on a 2019 Ram after a pump replacement. Test fuel pressure and the control wiring before buying parts.
Sources and review
- NHTSA complaint ODI 11450515: 2016 Ram 1500, P062A fuel pump circuit A range/performance
- NHTSA complaint ODI 11603000: 2018 Alfa Romeo Giulia, P008A and P062A, fuel pump replaced
- NHTSA complaint ODI 11568754: 2017 Alfa Romeo Giulia, U0415, P008A, P062A and P0087 with highway stalls
- NHTSA complaint ODI 11708376: 2019 Ram 1500, P062A returning after fuel pump replacement
- P060C, P0615, P062A, P0643 code pages
- Last reviewed
- Written by
- Saurabh K.
- Editorial review
- Pending
- Technician review
- Technician review pending
This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error