P0207: Cylinder 7 fuel injector circuit fault

Cylinder 7 injector circuit malfunction

P0207 in short

P0207 means the computer found a fault in the electrical circuit of the cylinder 7 fuel injector, so the engine has at least seven cylinders. Causes include a failed injector, a damaged harness or connector, or a computer driver fault. GM trucks with this code have shown reduced power, so get it checked soon.

The computer switches each injector and monitors the circuit. P0207 is set when the cylinder 7 injector circuit is open, shorted or not responding.

GM bulletins for 2004 to 2005 trucks pair P0207 with P2149, a related injector group code, and report reduced engine power and a bank shutdown behaviour.

Check your service information to see which cylinder is number 7 on your engine.

Most likely causes

  1. Cause 1: Failed injector on cylinder 7

    Common general cause
    Why it ranks here
    An open or shorted injector coil sets circuit codes directly and Ford and GM bulletins replace injectors for this family.
    What would change this
    Rises if coil resistance is out of spec. Falls if it tests normally.
    How to test the fuel injector
  2. Cause 2: Damaged harness or connector for the cylinder 7 injector

    Supported by vehicle data
    Why it ranks here
    Ford bulletin 19620 and GM 22-NA-087 deal with open injector circuits and the harness.
    What would change this
    Rises if the connector is loose or the harness is chafed. Falls if wiring tests clean.
  3. Cause 3: GM driver module or revised-part issue (2004 to 2005 trucks)

    Supported by vehicle data
    Why it ranks here
    GM bulletin 05-06-04-047 pairs P0207 with P2149 and installs a revised part, though the NHTSA summary is short.
    What would change this
    Rises on the listed 2004 to 2005 trucks if the dealer finds the bulletin applies. Falls on other vehicles.
    How to test the engine control module (ecm / pcm)

What to test first

Start at step 1. Each result tells you what it means and where to go next.

  1. Step 1: Read all codes and note P2149, P0202, P0300 or misfire codes stored with P0207.

    Low riskTool: OBD-II scan tool

  2. Step 2: Have the cylinder 7 injector connector, coil resistance and pulse tested.

    Best left to a shopTool: multimeter, noid light

    Warning:Injectors are under fuel pressure and near hot parts. Let a shop do it.

Symptoms

  • Check engine light with misfire or rough running
  • Reduced engine power
  • Flashing check engine light Gets more serious: stop and have it checked.

How to fix

  1. Step 1: With the engine off and cool, check that the injector connectors are fully seated.

  2. Step 2: Ask a dealer whether a GM or Ford injector bulletin applies to your VIN.

Parts and cost context

  • Fuel injector:Confirm with injector tests before replacing. Labour varies; get a quote.

Labor varies by vehicle and shop; get a quote before you approve a repair.

Compare used part prices on PartPriceGuide

On your vehicle

Chevrolet

  • 2004–2005 · Silverado 1500

    Supported by vehicle data

    GM bulletin 05-06-04-047 covers reduced power with P0207 and P2149 on 2004 to 2005 Silverado and related trucks. Not verified as current.

  • 2004–2005 · Silverado 1500

    Supported by vehicle data

    GM bulletin 060604026 covers an injector driver circuit concern on 2004 to 2005 trucks. Not verified as current.

  • 05-06-04-047Status unverified

    Reduced power with P0202 and P2146 or P0207 and P2149

    2004–2005silverado-1500 · issued · NHTSA 10017389

    Covers a check engine light with reduced engine power and injector circuit codes. The summary says to install a revised part and adds P1294.

    We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.

  • 060604026Status unverified

    Intermittent light, reduced power, fuel injector driver circuit codes

    2004–2005silverado-1500 · issued · NHTSA 10020835

    Covers an intermittent check engine light with reduced engine power and fuel injector driver circuit codes P0201 to P0208 on 2004 to 2005 trucks. The summary mentions cylinder bank shutdown codes.

    We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.

Ford

  • 2008 · F-250 Super Duty

    Supported by vehicle data

    Ford bulletin 19620 covers injector circuit open codes on 2008 Super Duty. Not verified as current.

  • 19620Status unverified

    Injector circuit open codes P0201 to P0208 with misfire or lack of power

    2008f-250, f-350 · issued · NHTSA 10021620

    Covers injector circuit open codes with a misfire, rough running or lack of power on 2008 Super Duty trucks.

    We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.

All Fuel pump and injectors codes

Sources and review

  1. Chevrolet 05-06-04-047: Reduced power with P0202 and P2146 or P0207 and P2149 — NHTSA manufacturer communications ,
  2. Chevrolet 060604026: Intermittent light, reduced power, fuel injector driver circuit codes — NHTSA manufacturer communications ,
  3. P0207 trouble code explanation — TroubleCodes.net
  4. P0207 OBD-II trouble code — PartsAvatar
  5. Ford 19620: Injector circuit open codes P0201 to P0208 with misfire or lack of power — NHTSA manufacturer communications ,
Last reviewed
Written by
Saurabh K.
Editorial review
Pending
Technician review
Technician review pending

This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error

My Car

Pick your car and code pages will point out notes and bulletins for it. Saved only in this browser.

Fill this in from your VIN

Used once to identify your engine; not stored.