P215C on Chrysler
On Chrysler, Dodge, Jeep and Ram vehicles, the transmission computer sees the output shaft speed and the wheel speeds disagree
Severity: Inspect soon
The check engine light comes on and the bulletins pair the code with shift quality, 4x4 and PTU problems; the Cherokee PTU bulletin mentions grinding and a vehicle that will not move.
It gets more serious if:
- Stop: Stop driving if there is grinding under the vehicle, a thump, loss of drive or the vehicle will not move; FCA's Cherokee bulletin links the code to a broken PTU input spline.
This page covers only what differs on Chrysler. For what P215C means, the ranked causes and the test order, see the P215C guide.
What's different on Chrysler
ChryslerYour car
2014 · 300
Supported by vehicle dataTCM flash for P215C set while braking on AWD cars.
21-031-14 (chrysler)Status unverified
Quick Learn enable and P215C set while braking
2014300 · issued · NHTSA 10139758
TCM reprogramming for P215C on AWD cars and to enable Quick Learn.
We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.
Sources and review
- FCA 21-031-14: Quick Learn enable and P215C set while braking
- FCA 21-017-21: Power Transfer Unit broken input spline, X89 warranty extension (2014-2017 Cherokee)
- Last reviewed
- Written by
- Saurabh K.
- Editorial review
- Pending
- Technician review
- Technician review pending
This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error