P129F on Buick
On GM vehicles, the fuel pump power control module reports that the fuel pump speed signal is incorrect
Severity: Inspect soon
The module that runs the fuel pump has a fault. GM lists crank/no-start, stalling and loss of power with this code, so the car may leave you stranded. Get it inspected soon.
It gets more serious if:
- Stop: Stop driving and have it towed if the engine stalls, cuts out or loses power while moving. GM's bulletins list stalling and loss of power with this code, and a sudden loss of drive power in traffic increases the risk of a crash.
This page covers only what differs on Buick. For what P129F means, the ranked causes and the test order, see the P129F guide.
What's different on Buick
BuickYour car
2021–2023 · Enclave
Supported by vehicle dataFPDCM replacement for P129F with no-start or stalling. Whether the bulletin is still current is not verified.
Sources and review
- 24-NA-139: Replace fuel pump driver control module for no start, stalling, loss of power with P023F/P129F
- Fuel Pump Power Control Module Internal Short (GM TechLink)
- 2023 Integra Owner's Manual: Indicator, Coming On/Blinking
- Last reviewed
- Written by
- Saurabh K.
- Editorial review
- Pending
- Technician review
- Technician review pending
This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error