B162F on Jeep

Right low beam headlamp control circuit fault (Jeep)

Severity: Severity not verified — if the car runs badly, have it inspected

We did not read a manual for the severity, but the owner reports in the sources describe the low beams going out while driving.

Source: how we rate severity

This page covers only what differs on Jeep. For what B162F means, the ranked causes and the test order, see the B162F guide.

What's different on Jeep

Jeep

  • 2019–2020 · Renegade

    Supported by vehicle data

    Jeep bulletin S2008000125 covers an intermittent low beam headlamp out message with B162F-64. Only the summary was read.

  • 2008–2010 · Wrangler

    Supported by vehicle data

    Owner complaints read B162F as right low beam control circuit low and link it to the TIPM.

  • S2008000125Status unverified

    Jeep Renegade intermittent low beam headlamp out message with B162F-64 or B1638-64

    2019–2020renegade · NHTSA 10180223

    2019-2021 Renegade (also 500X). Summary names the message and DTCs only.

    We couldn't confirm whether this bulletin is still current, so it doesn't count as confirmation.

Sources and review

  1. Chrysler S2008000125: Jeep Renegade intermittent low beam headlamp out message with B162F-64 or B1638-64 — NHTSA (manufacturer communication)
  2. NHTSA complaint ODI 10928474: Jeep Wrangler 2-dr 4x4 2008 — NHTSA (owner complaint)
Last reviewed
Written by
Saurabh K.
Editorial review
Pending
Technician review
Technician review pending

This page explains what a code usually means; it is not a substitute for a professional inspection. How we source and review · Report an error

My Car

Pick your car and code pages will point out notes and bulletins for it. Saved only in this browser.

Fill this in from your VIN

Used once to identify your engine; not stored.